在录制的时候发现:vuser_init.c和action.c里面各有一个字符串需要关联。并且他们的左右边界竟然都一样(已经截取相当长了,发现还是一样的)但毕竟是在两个不同的action里面,我分成:param2和param4运行的时候提示了:action.c(45): error -26377: no match found for the requested parameter "param4". check whether the requested boundaries ex**t in the response data. also, if the data you want to s**e exceeds 256 bytes, use web_set_max_html_param_len to increase the parameter size [msgid: merr-26377]action.c(45): web_url("ccapp.trade.pageflow.bondbuyorder.flow") highest severity level was "error", 46387 body bytes, 536 header bytes, 104 chunking overhead bytes [msgid: mmsg-26387]然后我在action.c中加入了:web_set_max_html_param_len("10000000");发现不会报错了,在单笔测试的情况下,通过了。然后我设置场景,进行,我发现,偶尔会出现:action.c(45): error -26377: no match found for the requested parameter "param2". check whether the requested boundaries ex**t in the response data. also, if the data you want to s**e exceeds 10000000 bytes, use web_set_max_html_param_len to increase the parameter size, snapshot ** [msh 477 4]很奇怪的提示,难道的时候,param2与param4串了?(因为param2只在登录的时候有,后面的都是在action.c进行提交数据了,并且这个错误不是所有概率不是很高,有时候甚至半个小时的压力测试,一点错误都不会有,有时候确实5分钟内突然报了上千条这样子的error。可能是因为我并发量不大,目前为止,都是报这个错误,即使我进行10多个小时的稳定性测试,也是只报这个错,并且错误率达到了6%左右) 20210311